Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Gaffers on 14 March 2008, 22:56:05

Title: DIS Pack p/n please
Post by: Gaffers on 14 March 2008, 22:56:05

Can anyone help me with the above item for my 96 P reg omega 2.5V6 Saloon...?

vmt in advance chaps,

Gaffers

Title: Re: DIS Pack p/n please
Post by: Taxi_Driver on 15 March 2008, 00:00:20

Well......

It says in 'the book' ......

2.5/3.0 early models........90444184
Intermim models.......90511450
later models......90541062

So........take yer choice.......dont think it will be later models.......

HTH

Title: Re: DIS Pack p/n please
Post by: Gaffers on 15 March 2008, 00:31:31

hmmmm dont suppose it had any dates or engine numbers to differentiate?   :-/ :-/

Title: Re: DIS Pack p/n please
Post by: Elite Pete on 15 March 2008, 08:38:09

The only way to find the correct part is to take a look at the dis pack, if its standing upright its the early one if its lying down it's one of the others, then you need to look at the shape of the plug.

Title: Re: DIS Pack p/n please
Post by: Marks DTM Calib on 15 March 2008, 08:48:48

I suspect you have the early vertical one, but do check first.

Title: Re: DIS Pack p/n please
Post by: TheBoy on 15 March 2008, 08:57:36

The 96 N reg I had 2yrs ago for a few weeks had a vertical 'early' type.

Title: Re: DIS Pack p/n please
Post by: Gaffers on 15 March 2008, 13:58:18

The HT plug points and the connector all point upwards on mine, so is this vertical or horizontal......???

Title: Re: DIS Pack p/n please
Post by: achoo81 on 15 March 2008, 21:33:43

That is horizontal all you have to do now is look at the plug and make sure the dis pack you get is the same,also mark the plug leads before you take them out and make a drawing of were they are fitted in the old dis pack.

Title: Re: DIS Pack p/n please
Post by: Taxi_Driver on 15 March 2008, 22:05:00

Quote

hmmmm dont suppose it had any dates or engine numbers to differentiate?   :-/ :-/

Sorry it doesnt otherwise i would have posted info......

Title: Re: DIS Pack p/n please
Post by: MutantCav on 15 March 2008, 22:38:47

Early one changed to intermediate one somewhere in 96...so you could have either...but the earlier one is distinctive as it has the connector on the top of the pack when in place...the later dispacks have the connector on the side...

Title: Re: DIS Pack p/n please
Post by: Andy B on 15 March 2008, 23:09:16

Quote

That is horizontal all you have to do now is look at the plug and make sure the dis pack you get is the same,also mark the plug leads before you take them out and make a drawing of were they are fitted in the old dis pack.

The DIS is already numbered up with the plug numbers.  ;)

Title: Re: DIS Pack p/n please
Post by: Gaffers on 16 March 2008, 08:50:57

I have ordered one of the horizontal types.

Lets see how many years it take forces mail to get it to me.....