Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: topdogkelv on 17 March 2008, 19:28:04
-
does any one know of any websites where i can look at bodykits for my facelift mv6
-
http://www.mattig.de/content/index.php?option=com_phpshop&page=shop.product_details&itemid=1&category_id=efdcf6972d0d118a956e621be51e8cc4&product_id=3632
http://cgi.ebay.de/Heckschuerzenansatz-OPEL-OMEGA-B-NEU-TX_W0QQitemZ300204857263QQihZ020QQcategoryZ106714QQcmdZViewItemQQ_trksidZp1742.m153.l1262
http://cgi.ebay.co.uk/VAUXHALL-OMEGA-B-BOOT-SPOILER-PAINTED-ONLY-95_W0QQitemZ170180249499QQihZ007QQcategoryZ72209QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem
http://www.mattig.de/content/index.php?option=com_phpshop&page=shop.product_details&itemid=1&category_id=efdcf6972d0d118a956e621be51e8cc4&product_id=3622
http://www.mattig.de/content/index.php?option=com_phpshop&page=shop.product_details&itemid=1&category_id=efdcf6972d0d118a956e621be51e8cc4&product_id=11593
http://cgi.ebay.de/Seitenschweller-OPEL-OMEGA-B-C-NEU-TX_W0QQitemZ300204857507QQihZ020QQcategoryZ44212QQcmdZViewItemQQ_trksidZp1713.m153.l1262
Oh and I reckon the car looks better with these fitted :y
http://cgi.ebay.de/Seitenschweller-OPEL-OMEGA-B-C-NEU-TX_W0QQitemZ300204857507QQihZ020QQcategoryZ44212QQcmdZViewItemQQ_trksidZp1713.m153.l1262
the 25mm on either side are fine for the car.
Part number: EIBES90-3-25-004
-
does any one know of any websites where i can look at bodykits for my facelift mv6
http://www.irmscher.de/uk/ but limited availabilty and serious money
Can still play around with the various cosmetic modifications though
-
does any one know of any websites where i can look at bodykits for my facelift mv6
http://www.irmscher.de/uk/ but limited availabilty and serious money
Can still play around with the various cosmetic modifications though
Such as?
-
il have to brush up on zee german then
-
il have to brush up on zee german then
They pretty much all speak good English.
I bought the Steinmetz front valance last week (in the spray shop today)
I'm probably going to pick up the side skirts and wheel spacers in the next week or so.
I'm trying to keep the modifications very subtle, and slight. I didn't fancy the full on Irmscher kit as I think, whilst nice, it is a little too much for my taste. One of the other reasons is that the standard bumbers have a line/groove that continues the line from the mouldings from the side of the car; the Irmscher one's lose that and are a little too smooth and don't have the continuity.
For that reason I'm adding to the standard bumpers rather than the full swap.
The Steinmetz additions I have are like this at the front:
(http://www.steinmetzdirect.com/products/cars/omegab.jpg)
-
if you look in the gallery on page 11 you will see mine since then ive added a full S/S exhaust from longlife but still looks the same
-
if you look in the gallery on page 11 you will see mine since then ive added a full S/S exhaust from longlife but still looks the same
It's lovely and clean. Have you polished it with a proper cable polisher?
I intend to give mine a proper polish soon. I decided to go for the Steinmetz grille as I prefer not to have the chrome surround on the front
It looks great on your black car, but Mine's petrol blue and I like that colour better de-chromed.
-
no good old elbow grease and shed loads of miguires stage 1 2 and 3 spent all day on it and dam was i impressed so was the whole street :)
-
no good old elbow grease and shed loads of miguires stage 1 2 and 3 spent all day on it and dam was i impressed so was the whole street :)
Good job!
Where did you get the Maguires?
-
no good old elbow grease and shed loads of miguires stage 1 2 and 3 spent all day on it and dam was i impressed so was the whole street :)
Good job!
Where did you get the Maguires?
my local halfords stock the full range of meguirs :y