Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ron on 26 March 2008, 12:41:29

Title: satnav vauxall omega 3.2
Post by: ron on 26 March 2008, 12:41:29

can anybody help me update my tmc channel so my sat nav will work it will not calculate dont know why

Title: Re: satnav vauxall omega 3.2
Post by: Weds on 26 March 2008, 12:55:54

Quote

can anybody help me update my tmc channel so my sat nav will work it will not calculate dont know why

This might help

http://www.omegaowners.com/forum/YaBB.pl?num=1206136409

Title: Re: satnav vauxall omega 3.2
Post by: ron on 26 March 2008, 13:59:51

ive read the post thanks ive also got the 2007-8 disk from navtek useless piece of s*** if i do say anybody want to buy it?

Title: Re: satnav vauxall omega 3.2
Post by: Entwood on 26 March 2008, 17:00:34

Quote

ive read the post thanks ive also got the 2007-8 disk from navtek useless piece of s*** if i do say anybody want to buy it?

I'll give you 4s 6d  :)  unless its for the NCDC setup when I'll got to 5s 6d .. :)

Title: Re: satnav vauxall omega 3.2
Post by: TheBoy on 26 March 2008, 18:33:48

Its not clear what your issue is? Is it the satnav not working, or the TMC not working?

Title: Re: satnav vauxall omega 3.2
Post by: ron on 27 March 2008, 08:35:45

i can put address in but says cant calculate then says cant update tmc channel have disk 2007-8 navtek but still cant get it to work wonder if datona disk would work

Title: Re: satnav vauxall omega 3.2
Post by: VXL V6 on 27 March 2008, 08:49:38

When you first put a new disk into the 2013/2015 it goes through an update process, did this happen?

TMC message pops up the same on the 06/07 disk, I think there is a way to turn off TMC within the menu screen.  :-/

Title: Re: satnav vauxall omega 3.2
Post by: ron on 27 March 2008, 09:00:01

does not update properly you can deactivate tmc but dont think im getting tmc messages