Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: V8S on 30 March 2008, 19:18:16

Title: Self levelling - guide how to fit?
Post by: V8S on 30 March 2008, 19:18:16

Hi - I'm getting a self-levelling damper during the week and am looking for a guide or two to help fit it.

Anyone know of one? Have searched cavweb and OOF; lots of people saying they've fitted them, no one saying how.

Assume it's very straightforward then?

Cheers!

Title: Re: Self levelling - guide how to fit?
Post by: markey mark on 30 March 2008, 19:24:04

nut in boot hold top of shocker with 8mm spanner iirc 16mm nut to undo top then jack up 21mm bolt to remove that small clip for air pipe and youir away !! doddle matey !! :y :y

Title: Re: Self levelling - guide how to fit?
Post by: Andy B on 30 March 2008, 19:28:07

Quote

....
Assume it's very straightforward then?

Cheers!

Very! A nut & bolt at the bottom, & a nut inside the boot area (under the plastic domed covers) just make sure you fit the spread washer & rubber bushes correctly. As easy as that.

Title: Re: Self levelling - guide how to fit?
Post by: Elite Pete on 30 March 2008, 22:53:35

I would give the bottom nut and bolt a good clean with a wire brush and lashings of Plusgas the night before :y

Title: Re: Self levelling - guide how to fit?
Post by: wakeyomega on 30 March 2008, 23:53:36

Hi V8s
How about doing a guide (photos etc) when you do yours? It would be appreciated in the future