Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: cornish on 06 April 2008, 12:04:05

Title: Non starting V6 petrol
Post by: cornish on 06 April 2008, 12:04:05
Hi,
My 2.6V6 spins over but will not fire.Could it be the crankshaft sensor if so how easy is to replace.Oddly enough when disconnecting the battery the alarm goes off!

Many thanks

Cornish
Title: Re: Non starting V6 petrol
Post by: tunnie on 06 April 2008, 12:33:09
sounds like crank sensor, easy fix!
Title: Re: Non starting V6 petrol
Post by: Mike Collins on 06 April 2008, 12:47:39
To stop the alarm, disconnect the battery within ten seconds or so after turning off the ignition.
Title: Re: Non starting V6 petrol
Post by: TheBoy on 06 April 2008, 13:48:22
What does engine management light do when you switch on ignition?
Title: Re: Non starting V6 petrol
Post by: cornish on 06 April 2008, 16:14:53
Engine management light is on when ignition switched on and stays on whilst cranking.

Cornish
Title: Re: Non starting V6 petrol
Post by: Entwood on 06 April 2008, 16:29:49
Is the light steady or flashing while cranking ???

If flashing it is an immobilisor problem, and thats why it won't start.

If steady it is a fault code ... as it can't be "paperclipped" it needs a code reader ..

If you put your car details and location in your profile it will save everyone asking you !! and those nearby may be able to help  :)