Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bibbot on 19 April 2008, 17:23:37

Title: torque wrench low setings
Post by: bibbot on 19 April 2008, 17:23:37

hi all eny one know of a torque wrench with low setting for when i do my cam covers
thanks

Title: Re: torque wrench low setings
Post by: dbug on 19 April 2008, 17:32:51

Try
http://cgi.ebay.co.uk/Sykes-Pickavant-3-8-Torque-Wrench-60Nm_W0QQitemZ110244777208QQihZ001QQcategoryZ30917QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.co.uk/BRITOOL-HAND-TOOLS-1-4-DIAL-TYPE-TORQUE-WRENCH-10-140kg_W0QQitemZ140225397806QQihZ004QQcategoryZ30917QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.co.uk/Torque-Wrench-Micrometer-3-8-Drive-7-112Nm-5-83lb-ft_W0QQitemZ160228752415QQihZ006QQcategoryZ30917QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.co.uk/3-8-DRIVE-MICROMETER-TORQUE-WRENCH-TOOL-5-80-lb-ft_W0QQitemZ170210293186QQihZ007QQcategoryZ30922QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Title: Re: torque wrench low setings
Post by: Entwood on 19 April 2008, 17:37:33

I got this one

http://www.pvrdirect.co.uk/productinfo.aspx?catref=Teng-TEN3892AGE1

Sometimes found on ebay as well . :)

Title: Re: torque wrench low setings
Post by: bibbot on 19 April 2008, 17:42:43

thanks lads ill look them up

Title: Re: torque wrench low setings
Post by: Dazzler on 19 April 2008, 18:20:39

Or borrow one, just leave a deposit ;)