Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: f13platform on 22 April 2008, 21:08:46

Title: break noise?
Post by: f13platform on 22 April 2008, 21:08:46
i have noise when i leave the break
i mean just when i perss the pad fully than i leave it ...
the noise is from inside i dont know
something i dont like

i opened the wheels today check is thier anything wrong
everything look so good
but ....

any1 have the same thing ? or  something wrong?


((disc look new
new pad month ago
new break fuild))
Title: Re: break noise?
Post by: ians on 23 April 2008, 09:37:07
I think you need to explain what this noise was like a bit more.
Mechanical/rubbing/grating...

and where from - wheel area (front/back) ..?

I assume you mean when you are going along or do you mean it happens when stationary as well?
Title: Re: break noise?
Post by: f13platform on 23 April 2008, 14:40:50
it happen stationary

sound like mechanical

and it come from inside car
 
where the break is
Title: Re: break noise?
Post by: Entwood on 23 April 2008, 14:44:58
Is it a single "clunk" noise when you press the brake pedal with the ignition on ?? If so (as yours is an automatic) it could be the gear interlock solenoid, the one that prevents you taking it out of park without pressure on the brakes.

If it is not this, and the noise comes from inside without the ignition on, then I suggest its a "heads down in the footwell" to see what is going on.

HTH
Title: Re: break noise?
Post by: f13platform on 23 April 2008, 15:02:12


it happen when ignition is on but nt when i change the gear from
P to D or R
most of the time it happen when im in traffic light
when i fully stop .(spacialy when i want to stop in down hill)
but no nise when i want to stop in up hill
and i dont put my feet so hard
Title: Re: break noise?
Post by: Dazzler on 23 April 2008, 15:29:34
its the solinoid for the gearbox lock which moves when you press the brake pedal so i would say its normal.
Has the noise always been there or have you just noticed it?
Title: Re: break noise?
Post by: f13platform on 23 April 2008, 15:34:33
always been thier
Title: Re: break noise?
Post by: Dazzler on 23 April 2008, 15:40:32
Yes as you press the brake pedal on and off you get a loudish click/clunk from the gearshift area.......this is normal ;)
Go and give it a try and report back, ignition must be on.
Title: Re: break noise?
Post by: ians on 23 April 2008, 15:44:07
Surely the solenoid clock would only happen when in park (to enable selection of a 'gear')?   Can't remember without checking if it does in in drive too.
Title: Re: break noise?
Post by: f13platform on 23 April 2008, 16:00:28
 ign on

i perss  i hear 1 clunk

and when i let go

i hear 1 clunk