Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Richie London on 23 April 2008, 13:19:26
-
i did my breathers a couple of weeks ago, idleing has been a bit up and down last few days again so i took the plenum off and did again. i found the black ecotec non top was totally blocked in the narrow tube. took a whole can od carb spray to clear and a good rodding (not rodgering if you have poor eyesight) to get totally free. so then i left for 1hr to dry then sprayed with wd40.
Anyone who does it for the first time do make sure it is TOTALLY clean and dry of water as it could block again like mine. same goes for iacv.
you live and learn :-[ :-[
richie
-
aye does take some clearing if blocked proper !! :(
-
ive a feeling my leads are no good, stiill not sounding right, i took one of the leads out the plug yesterday and the metal tube in the lead stayed on the plug.
what am i expected to pay for a new set of leads. wheres best place to get.
richie
-
ive a feeling my leads are no good, stiill not sounding right, i took one of the leads out the plug yesterday and the metal tube in the lead stayed on the plug.
what am i expected to pay for a new set of leads. wheres best place to get.
richie
if the metal tube has come out of lead thats knackered bud !! dont from vauxhall cost a fortune !! ebay bosch ones are very good ! :y