Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Vmax on 03 May 2008, 18:42:29

Title: EML
Post by: Vmax on 03 May 2008, 18:42:29

Hello all, I've just removed my plenum and cleaned the breathers, but the eml is now lit on the dash. it seems to run fine. I did notice that a hose at the front is badly split, excuse my ignorance but I dont know what the hose is. It is attached, passenger side front, to a silver cylinder and a black plastic doobry at the other end  :-[ it is blowing a lot of air out.... Any ideas please ????? :-/

Title: Re: EML
Post by: batista on 03 May 2008, 19:02:05

i done this and had the same problem,found out that i had forgot to reconnect the plug on the passenger side rear of plenum :y

Title: Re: EML
Post by: Vmax on 03 May 2008, 19:03:53

Yeah I thought of that, its connected ,,,,, :-/ thanks anyhooo

Title: Re: EML
Post by: batista on 03 May 2008, 19:08:17

what your explaining sounds like the icv.have you done paper clip test

Title: Re: EML
Post by: Vmax on 03 May 2008, 19:10:32

whats an ICV ?? :-[

Title: Re: EML
Post by: batista on 03 May 2008, 19:14:45

idle control valve :y

Title: Re: EML
Post by: Vmax on 03 May 2008, 19:33:45

Quote

idle control valve :y

Ahh thanks Matey, i forgot to reconnect the connector on the back... :y [smiley=beer.gif]