Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: seanshark on 30 April 2008, 17:32:45

Title: fault codes?
Post by: seanshark on 30 April 2008, 17:32:45

hi there does anyone have a list of fault codes and what they mean ? i have a 98 2.0 16v and its driving me nuts ,the thing runs like a bag of shite revs fluctuate after a run nomatter how short or it cuts out  but yet it starts fine  anyone else had similar?

Title: Re: fault codes?
Post by: Entwood on 30 April 2008, 17:34:30

Answers here :

http://www.omegaowners.com/forum/YaBB.pl?num=1189022687


:)

Title: Re: fault codes?
Post by: rickyboy on 30 April 2008, 17:48:03

Post your results from the paperclip test and we'll go from there.  Could be a number of things really.

Title: Re: fault codes?
Post by: seanshark on 05 May 2008, 14:18:21

hi there i did the paper clip test and im not sure if i read the code right or not despite doing the test 4 times to make sure , i got the code as 10335 ,could this be a p0335 which would be incorrect rpm signal if this is the case what does "incorect rpm signal" mean and what can be done   :-?  thanx for looking and your help so far  :y

Title: Re: fault codes?
Post by: TheBoy on 05 May 2008, 16:48:10

Quote

hi there i did the paper clip test and im not sure if i read the code right or not despite doing the test 4 times to make sure , i got the code as 10335 ,could this be a p0335 which would be incorrect rpm signal if this is the case what does "incorect rpm signal" mean and what can be done   :-?  thanx for looking and your help so far  :y

0335, knackered crank sensor