Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: billfxtwo on 08 May 2008, 12:39:34

Title: Secondary air pump relay voltage high
Post by: billfxtwo on 08 May 2008, 12:39:34

Hi, could anyone please tell me where the Secondary air pump relay is located and what the symptoms are when it’s not working properly the fault code is P0410,  Cheers Bill

Title: Re: Secondary air pump relay voltage high
Post by: rickyboy on 08 May 2008, 13:48:29

Can you update your profile details so we know what car you have?  It'll make helping you a lot easier.

2.0/2.2/2.5/2.6/3.0/3.2?

Title: Re: Secondary air pump relay voltage high
Post by: bighed on 09 May 2008, 02:07:17

It not working should not have any effect on the running of the engine as all this does is "warms" the cats on start up to comply with euro 3 emissions. Loo-knee has totally disconnected his of swmbo's mig!!  :y

Title: Re: Secondary air pump relay voltage high
Post by: rickyboy on 09 May 2008, 08:04:58

All the relays on the 2.0 l can be found next to the ecu in the box behind the battery if I recall correctly.  Don't know which one is which but there is only a few in there so you could test them all to see if they're working correctly.

Title: Re: Secondary air pump relay voltage high
Post by: Matchless on 09 May 2008, 12:33:18

I think this code is raised if the connector to the vacuum solenoid (on radiator, rhs) is disconnected or if the solenoid coil is open circuit.