Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: DaviesEB on 22 May 2008, 09:07:14

Title: Plenum
Post by: DaviesEB on 22 May 2008, 09:07:14

Hi All,

Do the Plenum ever go bad. I await my crank sensor and was thinking of cleaning up. I removed the plenum and cleaned it as per instruction.

Do i have to change the two o rings and the funny looking ring or thing underneath.

Thanks

Title: Correction
Post by: DaviesEB on 22 May 2008, 09:23:45

Sorry All,

What i actually meant was the o rings and the funny rubber underneath the Crankcase Breather no plenum.

So sorry for the previous error.
Thanks :(

Title: Re: Correction
Post by: Darth Loo-knee on 22 May 2008, 12:23:49

Quote

Sorry All,

What i actually meant was the o rings and the funny rubber underneath the Crankcase Breather no plenum.

So sorry for the previous error.
Thanks :(

The O ring under the top breather box that goes ontop of the plenum sometimes rip, only pence to replace, i put a smear of grease around it before refitting :y

Title: Re: Plenum
Post by: DaviesEB on 22 May 2008, 12:36:11

Thanks but any reference name for it. I know it is actually not an O ring. What do the call it. Yes mine is ripped off.

I am far away in Africa i want to stock as many petty parts that i will need that cannot be found here.

EG. All belts.

Thanks

Title: Re: Plenum
Post by: TheBoy on 22 May 2008, 17:46:42

The 6 plenum O rings are call plenum o-rings.  The strange breather seal is 90467543, not sure on name