Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: HolyCount on 14 June 2008, 15:47:22

Title: LPG conversion
Post by: HolyCount on 14 June 2008, 15:47:22

I have been offered a fairly new ( but used) multi point gas kit to do the front end upgrade on the elite from the single point.

It is currently in a 3 litre miggy and comes with the engine bay loom, so installation / swap over should be relatively easy, on the assumption that the looms for the 2.5 and 3 litre are the same ---- are they ????

Title: Re: LPG conversion
Post by: markey mark on 14 June 2008, 16:13:19

they are as near as you can get !! should be fairly easy fella  :y

Title: Re: LPG conversion
Post by: Kevin Wood on 14 June 2008, 23:43:34

Make sure you get the software to map it and cable, etc. :y

Kevin

Title: Re: LPG conversion
Post by: Jay w on 15 June 2008, 11:55:43

you will fine that the looms are generic and are not designed for one specific car.

2.5 or 3.0 will be fine, as Kevin has said software and OBD cable are essential.

what make is the kit?

Title: Re: LPG conversion
Post by: HolyCount on 18 June 2008, 20:51:41

Quote

you will fine that the looms are generic and are not designed for one specific car.

2.5 or 3.0 will be fine, as Kevin has said software and OBD cable are essential.

what make is the kit?

It's a Zavoli Alisei kit

Title: Re: LPG conversion
Post by: JamesV6CDX on 18 June 2008, 21:34:53

New kits are cheap enough not to mess with used ones, IMO

Title: Re: LPG conversion
Post by: HolyCount on 18 June 2008, 22:23:19

Possibly true, James -- but the £300 plus saved buys a lot of LPG  :)