Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: daveanj on 19 June 2008, 10:14:12
-
i bought a omega 3.0 elite estate a couple of months ago and its superb the only thing that is wrong with it is the glove box lid handle is off it, the handle is there and does not seemed to be damaged neither does where it fits on the lid it seems to be missing some bits does any one have these that i can buy them from or does anybody no the genuine part number from gm that i can order them from i did phone my local dealer in macclesfild but they couldn't help looking forward to your replies daveanj
-
Try looking at this, Dave, it might help.
http://www.omegaowners.com/forum/YaBB.pl?num=1213364513
-
thank you for that i have read it but it doesn't help as i said nothing seems to be broken i feel that i am missing some bits if i hold handle in position it works fine and the key locks it ok its like there should be some sort of hinge pins that hold in place
-
The part you want is 9101530 (Black) the numbers are different for other colours.
Retail £6 +vat
Just swap the barrel over, keep the key in when you do this else its bits everywhere ;)
Pic to follow....
-
Guessing you car looks like this...
(http://i202.photobucket.com/albums/aa229/littlejimmym/misc%20car/IMG_0466s.jpg)
That bit can be removed by prising with a screwdriver, or possible easier from the back.
You will be left with a hole...
(http://i202.photobucket.com/albums/aa229/littlejimmym/misc%20car/IMG_0471s.jpg)
To fit this into...
(http://i202.photobucket.com/albums/aa229/littlejimmym/misc%20car/IMG_0468s.jpg)
Thats as far as I've got, struggled to prise it in from the front, so am doing a replacement guide soon as I get round to playing more
-
The part you want is 90435964 (Black) the numbers are different for other colours.
Retail £6 +vat
Just swap the barrel over, keep the key in when you do this else its bits everywhere ;)
Pic to follow....
thank you for that look forward to pics i presume this part number is for the whole handle and fixing as i said handle is fine just need pins or clips to fix it but at 36-00 ish it will not break the bank cheers dave
-
FYI:
New Type (facelift)
Beige : 9105029
Black : 9105030
Grey : 9105031
Old Type (prefacelift)
Black : 9105030
Beige : 9104294
Grey : 9104025
These are from a Jan 08 version of EPC, the prefacelift black states no longer stocked, so use facelift part, so I am guessing they are all interchangable.
-
The part you want is 90435964 (Black) the numbers are different for other colours.
Retail £6 +vat
Just swap the barrel over, keep the key in when you do this else its bits everywhere ;)
Pic to follow....
jimbob thank you for that look forward to pics i presume this part number is for the whole handle and fixing as i said handle is fine just need pins or clips to fix it but at 36-00 ish it will not break the bank cheers dave
thats what i like about this forum i have just rung my local dealer up part number has changed now but it is ordered and will be here saturday once again many many thanks all the best dave
-
The part you want is 90435964 (Black) the numbers are different for other colours.
Retail £6 +vat
Just swap the barrel over, keep the key in when you do this else its bits everywhere ;)
Pic to follow....
jimbob thank you for that look forward to pics i presume this part number is for the whole handle and fixing as i said handle is fine just need pins or clips to fix it but at 36-00 ish it will not break the bank cheers dave
thats what i like about this forum i have just rung my local dealer up part number has changed now but it is ordered and will be here saturday once again many many thanks all the best dave
Editied, you were too quick ::)
-
How2 now finished and in maint guides.....
If you haven't done it yet that is :y
-
How2 now finished and in maint guides.....
If you haven't done it yet that is :y
thanks but all done and dusted i still can"t believe how helpful this forum is if i would of known i would of bought an omega years ago once again cheers dave & anj