Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Darren Green on 23 June 2008, 17:02:02

Title: Heater Blower Motor for 2.5 V6 W plate
Post by: Darren Green on 23 June 2008, 17:02:02
The heater blower motor is on its way out so I went to a Vauxhall breakers and he said he needs to see, touch and vertually taste the motor to tell me if the replacement will fit.
Does anyone know if my Omega has a special type of heater blower or would one from another Vauxhall (Astra or something) be okay?
Mines a V6 2.5 CDX on a W plate.
Has anybody got a motor to sell as well please?
Thankyou,
Darren.
Title: Re: Heater Blower Motor for 2.5 V6 W plate
Post by: Marks DTM Calib on 23 June 2008, 17:21:56
Only one type of motor fitted......that I am aware of!

What are the symptoms for failure?
Title: Re: Heater Blower Motor for 2.5 V6 W plate
Post by: Darren Green on 23 June 2008, 18:26:14
The bearings I think as the faster the setting the noisier it becomes, also, The passenger airbag vibrates.
Title: Re: Heater Blower Motor for 2.5 V6 W plate
Post by: Taxi_Driver on 23 June 2008, 18:32:39
It will have lost a balance weight off one of the blades then........

Will keep going but as you say it will be noisey and vibrate.....

For my 2.2 there were two different types.......But i got lucky and one from a 2.0 fitted, the motors are the same i think, its the plastic surround that varies.

I'll try to find more info for you........
Title: Re: Heater Blower Motor for 2.5 V6 W plate
Post by: Darren Green on 23 June 2008, 18:45:29
As I already have the existing housing then would either motor fit into it or is the motor compete with the housing?
Thanks for your help.
Title: Re: Heater Blower Motor for 2.5 V6 W plate
Post by: Taxi_Driver on 23 June 2008, 18:48:46
-MOTOR, ASSY., FAN, RHD   -V1000558 90509619

-MOTOR, ASSY., FAN, RHD  V1000559- X1999999 90541103

Best I could come up with.........i carnt remember how i found out an early 2.0L one would fit mine.......the later 2.0 doesnt apparently.

As said before i think its the plastics that are different........however it may be possible to swap the plastics over  :y