Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: HerefordElite on 17 July 2008, 23:21:53
-
Finally getting round to replacing my old lights with some ebay projectors (once i've swopped the broken adjusters ;))
Am i right in saying that i'll need to remove the bumper to get headlights off because the headlight washers are bolted to underside of headlights and in the way?? ::)
-
check this out mate :y it helped me and pictures with washers aswell :y :y
http://www.omegaowners.com/forum/YaBB.pl?num=1154966960
-
check this out mate :y it helped me and pictures with washers aswell :y :y
http://www.omegaowners.com/forum/YaBB.pl?num=1154966960
that guide is for a facelift which have the washers in the bumper - mine is a 97 prefacelift which have the washer jets bolted to underside of headlights ::)
-
oh right ::) i used this guide to change my headlights on my pre-facelift and it was exactly the same!!screws in same places etc...
but obviously washer jets are different sorry mate :) :y
-
Its much easier to do with the bumper off!
-
nah i had both of myn out hereford very simple didnt need to remove front bumper and myn also have headlight washers on my mini facelift
passangers side is abit hard battery needs to be removed
the washers are easy i removed the ends and also removed the small grills by the foglights i then managed to remove the washer water feeds either side and managed to get the lamp out!
-
Its much easier to do with the bumper off!
yeah looks that way ;)