Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: deks on 26 July 2008, 23:03:46
		
			
			- 
				Hi to all ,can anyone tell me can i fit a fire trap to a 2.5 v6 and if so where to buy and where to fit it ? cheers
			
- 
				err, why do you need one?
			
- 
				err, why do you need one? 
 
 more importantly .... WHAT is one !!!   :-/ :-/
- 
				err, why do you need one? 
 
 more importantly .... WHAT is one !!!   :-/ :-/
 
 Seconded  ::)
- 
				Are you refering to the breathers?
 
 VX added a 'firetrap' to the X20XEV (Mainly Vectra's), basically it was a wire filter in a box retrofitted to the oil pipe from the sump to the camcover.
 
- 
				It wont fit, I know cos i tried, I have one in my garage if you want the part number ill get it for you later. I have them fitted to my 2x 16v omegas, handy for catching the mayo on short journeys.
 
 Alot easier than cleaning the whole cam cover.
 
 cheers
- 
				hi sorry mean flame trap ,just been reading lots of posts on other vauxhall web sites and they have talked about flame traps to stop (help) the breather problems
			
- 
				I fitted one to our 2.2, but the hose it is on needed replacing anyway, so removing that bend, and fitting one was perfect.
			
- 
				Flame Trap Breathers are fitted to Rover V8's too :y
 
 If you clean out the breathers properly on you car then keep the engine oil changed regular you should have no problems with your breathers at all..