Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kcl on 01 August 2008, 21:10:01

Title: Torx- sizes
Post by: kcl on 01 August 2008, 21:10:01

Would be a good idea to list all the torx -key sizes (both male and female, but esp. the female) that you have found on Omegas? SOmeone must have the info? Most of us don't (yet) have a fulll range of female torx sockets...

Title: Re: Torx- sizes
Post by: philhoward on 01 August 2008, 21:35:48

I only have 2 female Torx - E8 and E10 and i think I used both of them to swap an engine.  Male Torx?  I have a set from T1 to T50, but think only the T25 and T40 have come out of the box so far..

Title: Re: Torx- sizes
Post by: rickyboy on 01 August 2008, 22:03:43

You can get a female torx rail with every size you'll need.  I got a draper one for about a tenner on an online tool shop.  Can't remember which one it was.  There are plenty about though.  Here's a couple of links for them...

http://www.diytools.co.uk/diy/Main/sp-1-1-27343-draper-tx-star-set-of-sockets-14pc..asp?sQuery=torx&iCategoryID1=1

http://www.toolspot.co.uk/product/7pc-3-8-dr-female-torx-sockets-on-rail-double-blister

Remember you'll need adapters for 1/4" 1/2" 3/8" depending on which drive you have.