Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Mr Skrunts on 02 August 2008, 00:12:08
-
Today I had a trip to the coast, just before I got there the passenger side windscreen all came out and the trip anded up flapping arround over the sunroof.
Any way, pushed it all back in and gave it a bit of a thump. All was ok on the way home.
Should there be any clips on anything else to hold the trim in place. I also noticed it had some black mstix showing on the inside of the car (between glass and pillar) so looks like it has had a screen fitted. (hope it wasnt the RAC)
-
should be clipped to screen before fitting so carnt come out fella :-/
-
should be clipped to screen before fitting so carnt come out fella :-/
Sounds like the RAC have struck again before I got the car then.
-
should be clipped to screen before fitting so carnt come out fella :-/
Sounds like the RAC have struck again before I got the car then.
unfortunatly yes ! or any windscreen place ! you have to use genuine parts pattern dont fit too well and are stiffer :-?
-
should be clipped to screen before fitting so carnt come out fella :-/
Sounds like the RAC have struck again before I got the car then.
With all taken into consideration you should ask yourself and check is the screen bonding still ok, or have you now got a complete separation of the screen from the body? :o :o Needs checking me thinks! :-?
-
should be clipped to screen before fitting so carnt come out fella :-/
Sounds like the RAC have struck again before I got the car then.
With all taken into consideration you should ask yourself and check is the screen bonding still ok, or have you now got a complete separation of the screen from the body? :o :o Needs checking me thinks! :-?
Annother job on the weekend todo list. :y