Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jay w on 02 August 2008, 12:39:26

Title: Elite set frames on MV6 seats
Post by: Jay w on 02 August 2008, 12:39:26
i would like to try and fit Elite full electric seat frames to my MV6 seats, having looked at the wiring on the CDX there is a lot more there than is required and i am wondering if the car has an Elite Loom fitted, so far i have found the additonal loom for the memory adjustment for the rear view mirror.

So the plan is to try and get two elite seat bases/runner assemblies with motors as well as the seat ECU and try and connect it all up to the MV6 seats i have, this having fully electric MV6 leather.....

Any ideas on if this is possible?
Title: Re: Elite set frames on MV6 seats
Post by: Dazzler on 02 August 2008, 12:45:38
Soory Jay, i have no idea :(

Are you ok venturing into this section ::) ;D ;D
Title: Re: Elite set frames on MV6 seats
Post by: Jay w on 02 August 2008, 12:49:58
Quote
Soory Jay, i have no idea :(

Are you ok venturing into this section ::) ;D ;D

Sorry i should have introduced myself

I am Jay and technically a newbie ;D ;D ;D

the other issue is finding a pair of ratty elite seats i can rob the frame/runners and motors from
Title: Re: Elite set frames on MV6 seats
Post by: Dazzler on 02 August 2008, 12:52:00
Welcome Jay the Techno newbie ;D ;D
Title: Re: Elite set frames on MV6 seats
Post by: CaptainZok on 02 August 2008, 13:38:47
Seem to remember Sassenach doing the same thing Jay.
Maybe a PM or a good googling would prove helpful.
Title: Re: Elite set frames on MV6 seats
Post by: VXL V6 on 02 August 2008, 15:14:50
Sassanach did the same thing and I think he vowed never to try it again!

Involved reworking the metal work of the seat frame and runners I think.
Title: Re: Elite set frames on MV6 seats
Post by: Jay w on 03 August 2008, 23:28:16
Quote
Sassanach did the same thing and I think he vowed never to try it again!

Involved reworking the metal work of the seat frame and runners I think.

if it's that difficult i might pass on it.....

Don't see Sasdsanach on here a lot these days otherwise i would ask him  :-/
Title: Re: Elite set frames on MV6 seats
Post by: sassanach on 03 August 2008, 23:34:08
lot of work but do-able,the base frame is virtually a straight swap, the problems are all in the seat back.
http://farm3.static.flickr.com/2407/2168466135_50e5819bc5_b.jpg
Title: Re: Elite set frames on MV6 seats
Post by: Jay w on 03 August 2008, 23:35:14
Quote
lot of work but do-able,the base frame is virtually a straight swap, the problems are all in the seat back.
http://farm3.static.flickr.com/2407/2168466135_50e5819bc5_b.jpg

do you need to swap the seat back?
Title: Re: Elite set frames on MV6 seats
Post by: sassanach on 03 August 2008, 23:38:23
not really i suppose, but if you want the complete memory  package then its got to be done :)
Title: Re: Elite set frames on MV6 seats
Post by: Jay w on 03 August 2008, 23:48:15
Quote
not really i suppose, but if you want the complete memory  package then its got to be done :)

right, so a swap it is then, thanks for the info  :y
Title: Re: Elite set frames on MV6 seats
Post by: sassanach on 03 August 2008, 23:49:50
what you have to do is cut off the rear seat hinge points off the elite frame and weld them onto the mv6 rear frame.the spindle for the electric seats have a different number of splines compared to the manual mv6 back adjuster(makes sense to me anyway) ;D
Title: Re: Elite set frames on MV6 seats
Post by: Jay w on 03 August 2008, 23:51:44
Quote
what you have to do is cut off the rear seat hinge points off the elite frame and weld them onto the mv6 rear frame.the spindle for the electric seats have a different number of splines compared to the manual mv6 back adjuster(makes sense to me anyway) ;D

makes sense to me as well, cheers