Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 07 August 2008, 16:17:32

Title: Wiper problems
Post by: JamesV6CDX on 07 August 2008, 16:17:32

Wipers cover the correct sweep. When I turn them off, the go to the bottom, but then come back up half way up the screen  :-/

Also the fastest setting doesn't work!

Motor or switch maybe?

Title: Re: Wiper problems
Post by: Kevin Wood on 07 August 2008, 16:19:55

It'll be the crank that's fitted to the end of the motor spindle. Probably slipped on the splines. I believe there are some arrows that should line up when the motor is at its' resting position...

Kevin

Title: Re: Wiper problems
Post by: Andy B on 07 August 2008, 17:25:39

Quote

It'll be the crank that's fitted to the end of the motor spindle. Probably slipped on the splines. I believe there are some arrows that should line up when the motor is at its' resting position...

Kevin

What he says! ^^^^^^^^^^^^  :y

There are 2 V's that should face each other like .... >< Take the whole assembly out & it's quite obvious.