Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Big_Roger on 16 August 2008, 20:05:41
-
Hi,
I have just replaced the leaking pinnion oil seal on the differential unit.
I am puzzled why it should have been leaking quite so bad, and wondered if there was a small air / pressure relief vent that is blocked.
While I was doing the job I looked as best I could, and felt around over the top of the unit, but couldn't find anything.
I know that when I had the diff off of my Senator, there was a small plastic breather/vent about the size of a 6mm bolt head on that.
Does anyone know if there is a breather/vent on the Omega diff.
Roger
-
Plastic vent on top iirc.
Designed to let all the oil escape from the spare diff under the garage bench.
-
Plastic vent on top iirc.
Designed to let all the oil escape from the spare diff under the garage bench.
PMSL ;D ;D ;D
-
Plastic vent on top iirc.
Designed to let all the oil escape from the spare diff under the garage bench.
;D ;D ;D ;D Classic!!
-
Plastic vent on top iirc.
Designed to let all the oil escape from the spare diff under the garage bench.
;D ;D ;D ;D Classic!!
.. and the consequential smell of cat's pee takes about a year to go. >:(
Next time I rebuild a diff I'll do it down the back of the garden. :-X
Kevin