Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: splott on 19 August 2008, 22:30:39

Title: Towbar electrics
Post by: splott on 19 August 2008, 22:30:39

I am removing the tow bar from my pre face lift 2.5 GLS and  hopefully fitting it to a facelift 2.5 CDX I have just aquired. Question is will I have probs or will it be straight forward?
Does anyone have the wiring diagram for the twin towing sockets for the facelift Omega, dammed if I can find it in the technical info bit.

Title: Re: Towbar electrics
Post by: tmx on 19 August 2008, 22:31:35

think the witter website has install guides

Title: Re: Towbar electrics
Post by: splott on 19 August 2008, 22:33:23

Cheers, never thought of that!!

Title: Re: Towbar electrics
Post by: Martin_1962 on 20 August 2008, 09:55:29

Don't forget to recover the chassis spacer tubes

Title: Re: Towbar electrics
Post by: splott on 20 August 2008, 18:16:28

Quote

Don't forget to recover the chassis spacer tubes

Ok, what and where are they? :-/

Title: Re: Towbar electrics
Post by: alexandjen on 20 August 2008, 22:12:46

They drop into the holes drilled in the floor of the boot.

Edit: H1 and H2 on the fitting instructions.....................

http://www.witter-towbars.co.uk/towbars/vehicle_technical_details.aspx?VehicleTowbarID=1415

Title: Re: Towbar electrics
Post by: splott on 21 August 2008, 19:11:27

Quote

They drop into the holes drilled in the floor of the boot.

Edit: H1 and H2 on the fitting instructions.....................

http://www.witter-towbars.co.uk/towbars/vehicle_technical_details.aspx?VehicleTowbarID=1415

Thanks for the info much appreciated. :y
See you have a face lift omega is the wiring the same as the pre face lift? :-/