Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: skippybanger on 24 August 2008, 14:57:10

Title: ENGINE FAULT CODES FOR 3.2 V6
Post by: skippybanger on 24 August 2008, 14:57:10

hi i am going to do the pedal test on my 3.2 mv6 has anyone got a list of the fault codes

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: dbug on 24 August 2008, 15:52:32

Think these are Simtec controllers (??)

If so 4digit fault codes as below -

0100 Mass air flow sensor
0105 Intake manifold pressure sensor
0110 Intake air temperature sensor
0115 Intake coolant temperature sensor
0120 HEGO heater
0150 HEGO
0173 HEGO
0201/020/0203/0204/0205/0206 Injector 1/2/3/4/5/6
0230 Fuel pump
0325 Knock sensor
0330 Knock sensor 2
0335 Crank sensor
0340 Camshaft sensor
0351 Ignition coil 1+4
0352 Ignition coil 2+3
0400 EGR valve
0403 EGR valve
0410 Secondary air pump relay
0412 Secondary solenoid valve
0433 Fuel tank vent valve
0500 Odometer frequency sensor
0505 Idle speed stepper motor/idle air regulator
0560 Battery
1110 Switch over valve solenoid
1112 Switch over valve 1
1113 Switch over valve 2
1120 Throttle body malfunction
1229 Power supply relay
1231 Fuel pump relay
1320/1327/1328/1329 Knock control cylinder 1/2/3/4
1405 EGR valve
1410 Secondary air pump relay
1411 Secondary air pump
1501/1502/1503 Immobiliser control unit
1530 Air flow relay
1600 Internal control module
1601 ECU temperature high
1602 Knock control module
1604/1605/1606 Knock control unit
1640 Knock control unit or quad drive module
1690 MIL/Engine fail (malfunction indicator lamp)
1740 Torque control unit

If this is wrong, someone will soon correct me.

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: VXL V6 on 24 August 2008, 16:12:36

Post any codes up and we will advise!

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: TheBoy on 24 August 2008, 16:13:29

post up results and I'll look them up.  I haven't had time to produce a conclusive list yet

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: mark readman on 24 August 2008, 18:58:43

All cars sold in uk post year 2000 must be OBDii compliant by law
I have a full list of P codes however I can only post 6000 bits so can not post it up

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: TheBoy on 24 August 2008, 19:33:18

Quote

All cars sold in uk post year 2000 must be OBDii compliant by law
I have a full list of P codes however I can only post 6000 bits so can not post it up

Don't worry, I'll post up the Omega ones in a day or 2.  Generic P codes aren't that useful, as the OBDII standard has too much scope for manufacturer specific.

And it was 2001 for petrol and 2003 for tractors ;)

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: skippybanger on 24 August 2008, 19:41:27

thanks everyone

Title: Re: ENGINE FAULT CODES FOR 3.2 V6
Post by: VXL V6 on 24 August 2008, 19:43:49

For information the ECU is Bosch Motronic 3.1.1