Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MutantCav on 24 August 2008, 08:33:13

Title: 3.0 Cams
Post by: MutantCav on 24 August 2008, 08:33:13

3.0 Omega cams are A and G cams...what are the E and F cams out of?? and are they the same?

Title: Re: 3.0 Cams
Post by: HerefordElite on 24 August 2008, 20:32:01

Quote

3.0 Omega cams are A and G cams...what are the E and F cams out of?? and are they the same?

E & F are from 2.5xe i think - and you can put the 3.0 inlet in a 2.5 to give more lift and therefore more power (as fitted to Vectra Gsi 2.5v6@190bhp)

Can't remember which is which but if MDTM reads this i know he knows ::)

read a post on subject before but can't find it :-/

Title: Re: 3.0 Cams
Post by: Marks DTM Calib on 24 August 2008, 20:53:04

All the info is in the maintenance guide area.

http://www.omegaowners.com/forum/YaBB.pl?num=1152565319

And on the X25XE unlike the C25XE (cav and calibra) you need to swap both inlet and exhaust cams!

Title: Re: 3.0 Cams
Post by: HerefordElite on 24 August 2008, 21:59:00

Quote

All the info is in the maintenance guide area.

http://www.omegaowners.com/forum/YaBB.pl?num=1152565319

And on the X25XE unlike the C25XE (cav and calibra) you need to swap both inlet and exhaust cams!

I knew you knew :y

been searching TIS but it ain't on there it's on the V6 engine manual (which i haven't got ::))

Title: Re: 3.0 Cams
Post by: MutantCav on 24 August 2008, 22:00:53

Sorted...thanks

Title: Re: 3.0 Cams
Post by: kris9128 on 24 August 2008, 23:24:58

Quote

Sorted...thanks

hi mate. have been told you may have a spare set of 3.0l cams for sale and would possibly consider doing the upgrade on my car for a lot of beer tokens  ;D ;D ;D ;D ;D ;D