Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: omega3000elite on 28 August 2008, 05:21:41
-
As above ... my ashtray wont stay shut ! Feels stiff too ... Elite 2000 model ... help please ?!
Ta ,
Alan
-
Anybody ??
-
Sometimes the ashtray can come unseated from it's "runners". I had a stiff ashtray and by just removing it and reseating cured the problem. It's easy enough to remove.
-
I had the same problem, took it apart and found some black bits of plastic behind the right hand side which were preventing it from closing.
Took a while to figure out and a lot of poking, prodding and dismantling and some luck finding the bits in the end.
-
My wife has the same problem on her Omega and on the previous one she owned, very annoying!
-
I had the same problem, took it apart and found some black bits of plastic behind the right hand side which were preventing it from closing.
Took a while to figure out and a lot of poking, prodding and dismantling and some luck finding the bits in the end.
I had the same thing, removed the ashtray, found some bits of loose plastic, cleared them out, everything then fine.
-
How do I remove it ? Rather ask than bust it ! LOL
-
do you have handsfree installed? the cables from the cradle can feed alongside the ashtray and through a cutout on the main centre panel and if the cable has slipped or been moved it can prevent the ashtray from being closed properly.
-
How do I remove it ? Rather ask than bust it ! LOL
to remove it first open it, remove the detachable tray part using the grey button next to the cig lighter then behind this you will see a screw at the back, remove this and the two screws either side of the ashtray and it should pull out.