Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: star_whites on 29 August 2008, 18:20:43
-
I was driving to work this morning and had to stop at a red light. On pulling away the car went into limp mode and the autobox warning was on the screen. However the eml was not on and no codes have been stored.
I pulled over turned the engine off for about a minute then started the car. The fault has gone off and so far not come back on. Anyone got any idea why this would have come on??
-
Codes need to be read off by Tech2. There are othe rthreads on various problems such as low fluid or degraded oil quality. do a search on the topic
-
Yup, a tech2 session would be needed to find out why.
However, a full atf change is probably worthwhile
-
Dont know anyone near here with a Tech 2, however Ive just been to Halfords and got the Dex3 and sealant for tom morning. Will change the fluid and give the filter a really good clean.
-
Dont know anyone near here with a Tech 2, however Ive just been to Halfords and got the Dex3 and sealant for tom morning. Will change the fluid and give the filter a really good clean.
Marks_DTM_Calib in south Nottingham is nearest I know...
-
Got to try and get it sorted as Im off to Reading next friday and then Tenby in Wales the following week so the last thing I need is the bloody box packing up!