Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: skippybanger on 02 September 2008, 09:50:18
-
hi i just had my heater control valve done on my 3.2 mv6 because when i had my heater on cold it leaked water, now its been fixed there is no leak at all however since i have had it done i now have no hot air blowing out, can anyone help is there any obvious things it could be, i thought they had maybe put the 2 pipes on the wrong way
-
Either the pieps are the wrong way round and/or the vac hose is not connected.
-
cheers for that will have a check
-
or airlock in heater core...