Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: alenalper on 05 September 2008, 21:40:42
-
i check my car by tech-2 and got P1110 fault code.
i search but couldnt find any solution to fix it
P1110 intake manifold valve 1, where located and how can i fix this ?
x20xev, opel omega..
Thnx
-
bit out of my depth with this one, but is that a
2.0litre 4 cyl engine (paper clip)? And is that a v6 pedal trick code? Not familiar with these numbers tbh. Anyone?
-
It's a 4 cylinder 2.0 (X20XEV) running the later management but it's not a code I recognise..... :-[
-
whats the symptoms/problem? Is something wrong?
-
The code you list is listed in the Y26SE and Y32SE Motronic ME3.11 Fault Codes and your car shows as 2.0?
How were they read? Real Tech2 or an e-bay cheappo one with laptop?
-
(http://img383.imageshack.us/img383/3769/omegahatapt2.th.png) (http://img383.imageshack.us/my.php?image=omegahatapt2.png)
Here is the print screen photo.No eml light.Second fault was about egr and cable was disconnected , connect it and no eml light.Now when i check with op tech device i see p1110 fault but i have no any problem.
-
If the car is now running well after reconnecting the EGR then you have found your fault. After about 20 clean engine starts the P1110 code should clear itself....
-
Ok ,thank you .. :y