Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: unlucky alf on 05 September 2008, 19:39:55
-
i wanted to change my bulbs behind the heater controls, so after reading the manual i set about it, in the manual it says the facia for the switches is held by a sprung rod as indeed chris [MUTANTCAV] showed me today [we were drowned ;D], i rummaged about in the radio hole, found a rod & gave it a little tug,,,,ooooops! wrong rod >:(, i now have a rod just over a foot long with a thread on one end & a hook on the other & cant see where it goes or what it does, then to add insult to injury i discovered that my facia is held in different as it doesnt have A/C,[4 screws behind knobs], so could somebody please tell me what this rod does or how to refit it....cheers!
-
Wow mate, living up to the unlucky bit eh??
On the plus side, just sorted out another estate with leather so now have a spare black leather interior :)
-
yup chris i certainly am :(, i thought sod it & put everything back minus the rod, i can feel where it goes but can see sod all! as for the leather hmmmmm! ive just dribbled all over my keyboard, oh & looked at that bonnet & its got quite a few stonechips :'( looks like i`ll be doing some feathering out then! :y
-
Maybe I should have given you the gold one instead...wrong gold anyway lol Dont have a clue what rod it is...
Would say the leather is warm and cosy but its probably freezing its ass off in the garage...needs a good home to go to :)