Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: OMEGA VXR on 09 September 2008, 18:31:38

Title: CAMSHAFT SENSOR
Post by: OMEGA VXR on 09 September 2008, 18:31:38

Whats involved in changing this?
Is it difficult?
Is there a step by step guide in here somewhere?

Cheers

Title: Re: CAMSHAFT SENSOR
Post by: OMEGA VXR on 09 September 2008, 20:27:32

Is there anyone that can help :question :question

Title: Re: CAMSHAFT SENSOR
Post by: Lazydocker on 09 September 2008, 21:19:51

Not entirely sure on your car but should be easy enough... :-/ :-/ :-/

Title: Re: CAMSHAFT SENSOR
Post by: jimmas on 09 September 2008, 22:15:47

very easy, should be able to do easily in an hour, very basicly remove fan belt, then remove front plastic cam belt cover, you will then see cam sensor between cam pulleys held in place with 1 small bolt remove bolt and pull sensor upwards out between cam pulleys remove cable, replace and refit.

Title: Re: CAMSHAFT SENSOR
Post by: TheBoy on 09 September 2008, 22:26:00

Very easy - aux belt off, cambelt cover off, undo sensor, 'ecotec' strip off, unplug sensor, replace

Title: Re: CAMSHAFT SENSOR
Post by: OMEGA VXR on 10 September 2008, 07:58:12

Thanks guys  :y :) :y :)

I'll be doing that this evening weather permitting........... obviously!!