Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Alex W on 14 September 2008, 20:28:18
-
Just replacing the cam cover seals
Spent ages getting oil out of the plug wells with kitchen towel (Used nearly a whole roll on one side alone) even so when i took the plugs out to renew them it was obvious that a small very amount of oil will still have gone into the bore.
What is the consequence of this? Is it a problem?
-
if you have got the majority of oil out, it may smoke a little on startup but should clear. hth
-
Its a drop or two in each pot at the most
-
Its a drop or two in each pot at the most
that will be ok. :y
-
Thanks Johnny :y