Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: valliant72 on 24 September 2008, 18:29:05
-
Hi, just checking the multi rams, the front one works when u rev the engine hard, but the back one doesnt. If u connect a pipe to the diaghram on the back valve it works when vacuum applied, or have i got this back to front and the back one needs a higher revs, revved upto about 5000 rpm.
-
With a warm engine, slam the throttle wide open, you should see it move open for a moment. Needs a lot of intake vacuum for it to work which is difficult to achieve with the engine off load, but do-able.