Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: carson on 30 September 2008, 10:26:38

Title: warning lights problem
Post by: carson on 30 September 2008, 10:26:38

Help I have a 2.2 omega auto petrol which has been showing a warning light 10 mins after starting to drive. The light is a car with a spanner through it.
Checks with a friends code reader found a sensor fault previously which was resolved but reader now shows no faults, I AM TRYING TO AVOID GIVING THE VX DEALER £60/£80 JUST FOR INFO.
Any suggestions would be welcome


carson

Title: Re: warning lights problem
Post by: markey mark on 30 September 2008, 11:15:39

if you search you will find how to flash your codes out with pedal  :y

Title: Re: warning lights problem
Post by: rickyboy on 30 September 2008, 12:38:18

Quote

if you search you will find how to flash your codes out with pedal  :y

Don't think the pedal trick works with the 2.2's only 2.6 and 3.2.  Think you'll need to get your hands on a code reader.  

Common faults for the 2.2 is the cam sensor but without the codes being read it's just a stab in the dark.

Title: Re: warning lights problem
Post by: carson on 01 October 2008, 10:03:47

 [smiley=2vrolijk_08.gif]thanks will give it  a try


carson

Title: Re: warning lights problem
Post by: feeutfo on 01 October 2008, 10:13:17

did i see hotel 21(admin on here) now has tech 2?
2.2 can not be flashed as far as we know.
Tech 2/code reader only.

Title: Re: warning lights problem
Post by: carson on 01 October 2008, 11:49:12

thanks

carson

Title: Re: warning lights problem
Post by: TheBoy on 01 October 2008, 15:17:07

How far are you from Hotel21 - he has a Tech2 which will read the codes better than generic readers, and I bet he will be a lot cheaper than any dealer to read them.