Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: eddie on 05 October 2008, 20:52:29

Title: EGR Bolt size?
Post by: eddie on 05 October 2008, 20:52:29

What size star bit is needed to remove the EGR valve from its housing, the 2 downward facing ones. My biggest one is too small. Need to get one termorra.

eddie

Title: Re: EGR Bolt size?
Post by: serek on 05 October 2008, 21:05:09

is 24 mm spanner

Title: Re: EGR Bolt size?
Post by: eddie on 05 October 2008, 21:25:21

Thats the union bolt connecting the feed pipe to exhaust. I'm talking about the two torx (female) bolts holding the upper valve assembly to the rest of the egr.

eddie

Title: Re: EGR Bolt size?
Post by: Abiton on 05 October 2008, 21:39:07

T45, if it's the same fixings as a 2.0 engine's one.

Title: Re: EGR Bolt size?
Post by: ngrainqey on 05 October 2008, 21:43:23

a good set of torx male and female sockets is a 23pc set from screwfix! comes in a little blue box-has all the sizes i'v needed so far on my omega and has the ones for the torx bolts all round the plenium!
only 16 pounds too!

Title: Re: EGR Bolt size?
Post by: eddie on 05 October 2008, 22:10:05

A trip to the local spanner shop coming up!  Thanks guys.

eddie

Title: Re: EGR Bolt size?
Post by: ngrainqey on 05 October 2008, 22:25:43

Quote

A trip to the local spanner shop coming up!  Thanks guys.

eddie

if in doubt matey, screwfix is the way to go- cheap and good quality(go for that set i mentioned previously)

Title: Re: EGR Bolt size?
Post by: eddie on 05 October 2008, 22:57:08

Hang on! Theres a screwfix near me..................cool.

eddie

Title: Re: EGR Bolt size?
Post by: ngrainqey on 06 October 2008, 19:20:37

lol gud man  ;)

Title: Re: EGR Bolt size?
Post by: eddie on 06 October 2008, 20:10:51

Job done :y

eddie