Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: andy_hocking on 07 October 2008, 23:35:37

Title: facelift 2.2 petrol timing marks
Post by: andy_hocking on 07 October 2008, 23:35:37

hi all i changed my timing belt and pullys recently but could possibly be a tooth out. car starts and runs fine but have power loss on hills.
does anyone have a diagram of timing marks please.

Title: Re: facelift 2.2 petrol timing marks
Post by: feeutfo on 08 October 2008, 00:45:24

4 pot dvd in club shop? Any good? Are there no corresponding Marks on the back/ belt cover to line up with?

Title: Re: facelift 2.2 petrol timing marks
Post by: Andy B on 08 October 2008, 00:54:28

As far as I can remember when i did SWMBO's Astra G 16v (similar engine) it was just a case of aligning the two cams' timing marks together & the crank timing mark & putting the belt on.

Title: Re: facelift 2.2 petrol timing marks
Post by: gwa on 08 October 2008, 13:19:05

Serek, another member replaced my Cam Covers and Cambelt etc a couple weeks ago and there was a problem. The genuine Vx replacemnt Cam belt did not have the marks which made it  more difficult to set-up. Anyway, he got another which had the marks and we used the Crank Kit supplied by The Boy.
We also changed the plugs and I bought 2 new DisPacks from fleabay. Did the complete oil & coolant things at the same time. All is now well. :y