Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Hoffi on 10 October 2008, 12:28:17
-
Came accross this a while ago but didn't get to ask: As I have removed my rear seat for cleaning I found three wiring connectors under the left part of the seat from which two (square format) seemed to fit together, the third one (flat) I guess is for rear seat heating which I don't have.
As I have the board computer telling me that I have an headlight vision issue I was wondering if that might be related to that.
So before just plugging the connectors together I first want to check that I am not messing anything up. And also good to know what that wiring is for.
BTW: Can anybody recommend a workshop manual? Don't mind if it is a disk or a book, just want to have something usable.
Again: Thanks for your replies!
-
get a haynes manual! lol
im not sure about the rear heated seat cables as i dont think mine has them.... without knowing i'd suggest either... cd changer cable, arial amp cable and then obviously heated seat cable- hope that helps
-
@ngrainqey: Is the Haynes manual of use?
Thanks for your suggestion. As I have some work to be done on my Meggy tomorrow I will check if both connectors fit and than plug them together and see what is happening. Try and error! ;)