Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Greg2041 on 13 October 2008, 12:53:12
-
Okay so I am a very tall person yet despite the Omega offering loads of legroom up front, even with the seat fully back, I still need a few more inches. Don't we all, I hear you say but how easy is it to shift the front seats back about 4-6 inches and how time consuming?
Cheers
Greg
-
I'm not sure that it will be easily possible without some sort of cutting and welding on ther floorpan and retapping holes as well
-
Thanks mate. I was hoping it wouldn't have to be that drastic.
Cheers anyway
Greg
-
The holes are at the front and back pretty much of the runner to connect it to the floor so would be a fair old deal to do...tap new screw holes in the floor (which is I believe raised so may well need spacers at the back too) and probably need some strengthening too perhaps?
-
I could do with mine going back a tad and a litle bit lower.
Please keep us informed (with pictures if possible) on what you manage to achieve. :y :y
-
I could do with mine going back a tad and a litle bit lower. .....
Apparently seats without the fully ecetric moment do go a bit lower. I always feels a liitle too high ... in the seat. ;) :y
-
I could do with mine going back a tad and a litle bit lower. .....
Apparently seats without the fully ecetric moment do go a bit lower. I always feels a liitle too high ... in the seat. ;) :y
We tried this yesterday, MV6 against Elite, reckon you get an extra 20 mm at the most
-
Crikey how tall are you?
My mate is 6'7" and he was OK in his old miggy. Was an MV6 though - maybe the sports seats are lower/deeper?
Liam