Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ian6pot on 18 October 2008, 13:39:47

Title: Fault code
Post by: ian6pot on 18 October 2008, 13:39:47

I have been having trouble with the tickover.It does not cut out but its very unstedy.I will be ok for a few mins and then it goes up to about 750-800 and the back down again.
I have checked the fault codes and now this is the question :-/

I have a code 19 stored(incorect RPM signal)is this likley to be the cause or could the code be caused by unsteady idle,if you see what i mean :y

Title: Re: Fault code
Post by: ian6pot on 18 October 2008, 14:39:43

A bit of a development.
Starting from cold is now a bit of a pig,once warm its ok.
Still getting code 19 even with engine running

Also when its starts from cold for a few seconds there is popping through the exhaust on overrun but clears after 30 or so seconds :-[

Title: Re: Fault code
Post by: Marks DTM Calib on 18 October 2008, 15:20:14

Crank sensor failing.....change asap.

Title: Re: Fault code
Post by: dbug on 18 October 2008, 17:56:44

Agreed - code 19 - crank sensor going kaput.

Title: Re: Fault code
Post by: feeutfo on 19 October 2008, 00:47:27

Aaye, change for genuine only its located by oil filter, guide in maintenance section.:-)

Title: Re: Fault code
Post by: ian6pot on 19 October 2008, 01:56:06

Thanks for the input,pretty much what i thought really :'(

I will get one on monday and bob it on :y