Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: doog on 24 October 2008, 22:52:45

Title: elite seats in a non elite car
Post by: doog on 24 October 2008, 22:52:45

Hi all
Ive been fitting my car out with elite seats
the passenger side went in no problems wiring mached up fine plugged it in and away it went  no problems

then i done the drivers side  I bolted it down plugged in the cables that were there and nothing
is there anything i need to change to make the elite seats work in mc CD?

thanks in advance for any help

Doug

Title: Re: elite seats in a non elite car
Post by: Timbuk on 25 October 2008, 00:40:28

If you have correct harness in place on a CD i will be very surprised :o

Title: Re: elite seats in a non elite car
Post by: ian6pot on 25 October 2008, 06:04:41

Try this
http://www.omegaowners.com/forum/YaBB.pl?num=1154467767

Title: Re: elite seats in a non elite car
Post by: MutantCav on 25 October 2008, 08:06:37

If your just plugging the wiring harness for your CD into the elite plug then it wont work...only basic wiring on the CD and not set up right for the power connections for all the extra electric seat functions on the elite drivers seat...

But its simply a matter of connecting the wires you have on your CD going into the seat (single red and brown wire I believe) to the red/black and brown wires from the seat...red/black to red and brown to brown (although thats from memory...might be red to red and brown/black to brown??...but pretty sure its the first of these!!)