Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Kieran on 28 October 2008, 20:26:29

Title: Passed MOT but...
Post by: Kieran on 28 October 2008, 20:26:29
Hello everyone. Today i took my Omega in for an MOT and it passed but had an Advisory Notice on the Nearside Steering pivot point has slight play [2.2.b.1g] :-?. Has anyone had this problem before and what is involved getting it repaired. I am glad it passed but being so careful with my car i hate anything being wrong with it and would like to fix it myself if possible.
Thanks :)
Title: Re: Passed MOT but...
Post by: VX1 on 28 October 2008, 20:36:27
Quote
Hello everyone. Today i took my Omega in for an MOT and it passed but had an Advisory Notice on the Nearside Steering pivot point has slight play [2.2.b.1g] :-?. Has anyone had this problem before and what is involved getting it repaired. I am glad it passed but being so careful with my car i hate anything being wrong with it and would like to fix it myself if possible.
Thanks :)


This is the steering Idler arm. This can be sorted by replacing with a new one which you can get from fleeybay for about £15 ish.
HTH

Paul  :y
Title: Re: Passed MOT but...
Post by: achoo81 on 28 October 2008, 20:36:57
Hi Keiran, that is commonly called the steering idler it's not a hard fix but you need a taper breaker as part of the removal process, there should be a how to do it in the maintence section.
Title: Re: Passed MOT but...
Post by: Kieran on 28 October 2008, 20:39:15
Cheers Paul i will look on ebay. Have you any idea if it is a difficult job to do and what is invoved :). Thanks for your help :y
Kieran
Title: Re: Passed MOT but...
Post by: Kieran on 28 October 2008, 20:40:04
Will look in the Maintenance section cheers :y
Title: Re: Passed MOT but...
Post by: VX1 on 28 October 2008, 20:42:54
No its not a hard job to do, just the correct tools Saturday or Sunday afternoon alot of swearing if you have any problems. Just remember to soak the nut and the idler arm in good penatrating oil or deseizing spray.

Paul  :y
Title: Re: Passed MOT but...
Post by: Andy B on 28 October 2008, 21:25:35
Quote
..... you need a taper breaker as part of the removal process,  .......

Or a pair of 2lb hammers!  :y Judicious tapping/knocking I think is the phrase used.  ;D