Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Proz on 29 October 2008, 12:10:34
-
Hi all....
Drove the car this morning to an appointment , cruise worked fine ..... drove on the way back and its not working now . No fault codes showing. I added the cruise stalk myself after i bought a cheepy on fleabay ...then got Vx to activate it , been working fine for a few months . Is it likely to be the cheap stalk at fault ?
-
not necessarily the stalk bnut could be
no other symptoms? like speedo not working?
check relevant fuses, also check brake and clutch switch if fitted
-
not necessarily the stalk bnut could be
no other symptoms? like speedo not working?
check relevant fuses, also check brake and clutch switch if fitted
Everything else is working fine , speedo etc .... when i noticed it wasnt working i pulled over to switch off then on again and still didnt work .... just went out for another try there and its working again :-/
-
HAd this problem on my old vectra when i stopped after using it and started again it wouldn't work. I found that if you pressed the brake and the clutch it then worked again. Always seemed to happen when i stopped at a service station and then set off onto the motorway again, just a quick press on the clutch and brake when i was up to speed and all of a sudden it was working again! Hope that helps!
-
HAd this problem on my old vectra when i stopped after using it and started again it wouldn't work. I found that if you pressed the brake and the clutch it then worked again. Always seemed to happen when i stopped at a service station and then set off onto the motorway again, just a quick press on the clutch and brake when i was up to speed and all of a sudden it was working again! Hope that helps!
Its an auto box ... been out twice since it "didnt work" and it seems fine again :-/..... is this a symptom of something looming :-/