Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mondo76 on 12 October 2008, 13:42:16

Title: rpm sensor fault
Post by: mondo76 on 12 October 2008, 13:42:16

hi all thanx for lkooking , im getting a rpm sensor fault from time to time , comes and goes , anyone had this problem before , any ideas , cheers again

Title: Re: rpm sensor fault
Post by: Albatross on 12 October 2008, 14:12:21

Hi there,

It would help if you posted this in the "General Help" section rather than the newbies "Introduction" area; you'll get more help.

Interested to find out the answer because my rpm needle seems to "stick" and then "jump" occasionally too

Title: Re: rpm sensor fault
Post by: TheBoy on 12 October 2008, 20:29:13

moved to appropriate section

Title: Re: rpm sensor fault
Post by: chrisdb on 30 October 2008, 20:58:24

Yes, had this problme once. The rpm sensor was getting burnt out after a few weeks (was replaced about 5 times). Fault was caused because VX fitted an exhaust system badly and rpm sensor was getting cremated.

Symptoms were - engine would not rev over 2,800 rpm.