Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: fatboyfat on 08 November 2008, 16:25:10

Title: cut pipes????
Post by: fatboyfat on 08 November 2008, 16:25:10

Hello,can anyone tell me what these cut pipes maybe and even thoiugh i haven't noticed anything wrong with car should i be concerned as to why these are cut.Thanks

(http://[IMG]http://i396.photobucket.com/albums/pp42/gaz64/Picture051-1-1.jpg)[/img]


Picture didn't work try again.if this dont work see test#3 in the test zone.(http://i396.photobucket.com/albums/pp42/gaz64/Picture051-1-1.jpg)
(http://)

Title: Re: cut pipes????
Post by: Marks DTM Calib on 08 November 2008, 16:57:23

They look like the vac pips which operate the multiram, air injection adn ehater controls....

Can you get a shot of the brake servo pipe where the one way valve is (its just behind and above where that pic is)

Title: Re: cut pipes????
Post by: albitz on 08 November 2008, 17:02:48

look like old HT leads to me! :-/

Title: Re: cut pipes????
Post by: fatboyfat on 08 November 2008, 20:12:44

Quote

They look like the vac pips which operate the multiram, air injection adn ehater controls....

Can you get a shot of the brake servo pipe where the one way valve is (its just behind and above where that pic is)

this is the only other pic for now can do more if needed to track down what these are(http://i396.photobucket.com/albums/pp42/gaz64/Picture049-1-1.jpg)

Title: Re: cut pipes????
Post by: A1TNL on 08 November 2008, 20:19:23

Deffo HT leads you can see the plastic cable management around them.

They are difficult to remove so someone looks like they took the easy option.

The caps at the other end are probably just dangling near the dis pack

Title: Re: cut pipes????
Post by: fatboyfat on 08 November 2008, 20:24:40

Quote

Deffo HT leads you can see the plastic cable management around them.

They are difficult to remove so someone looks like they took the easy option.

The caps at the other end are probably just dangling near the dis pack

Is it ok to leave them well alone or should they come out???
Thanks for the input guys,appreciated.

Title: Re: cut pipes????
Post by: ngrainqey on 08 November 2008, 20:28:37

weeeell... they should really be taken out, if you take the plenium off then they shouldnt be too bad to get to!

Title: Re: cut pipes????
Post by: feeutfo on 08 November 2008, 22:04:42

bloody lazy bugger. Should come out but i dont suppose its doing any real harm. Maybe save that job for the next time you take the plenum off, for cam covers or whatever? Makes you wonder what else has gone on under the bonnet.

Title: Re: cut pipes????
Post by: Pete Elite on 08 November 2008, 23:44:06

 As said best left alone for now because if you start pulling at them it's likely to dislodge something else and cause you a lot of work :(.