Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: manny on 08 November 2008, 21:27:12

Title: Will parts fit?
Post by: manny on 08 November 2008, 21:27:12
Im going to change my steering tie rods and also the roll bar drop links.Are the the same on all omegas?Or is the mv6 different?
Title: Re: Will parts fit?
Post by: Darth Loo-knee on 08 November 2008, 21:40:15
sure droplinks are all the same mate :y
Title: Re: Will parts fit?
Post by: manny on 08 November 2008, 21:41:40
Quote
sure droplinks are all the same mate :y
What about the Track rod ends/tie rods?
Title: Re: Will parts fit?
Post by: Darth Loo-knee on 08 November 2008, 21:47:13
I am pretty sure track rod ends etc are the same
Title: Re: Will parts fit?
Post by: feeutfo on 08 November 2008, 22:44:58
honest answer is dont know. But, i know wishbones are the same across the range so i dont see any reason why the track rod ends should be any different.
Fairly sure from looking at various web sites the drop links are the same but also i dont recall anyone swapping to mv6 suspension having to change drop links?
Title: Re: Will parts fit?
Post by: RobG on 08 November 2008, 22:58:01
Quote
Im going to change my steering tie rods and also the roll bar drop links.Are the the same on all omegas?Or is the mv6 different?
Same :)
Title: Re: Will parts fit?
Post by: ngrainqey on 08 November 2008, 23:32:05
what robg said :P
all the front/rear suspension components are interchangeable. only exceptions could be going from prefacelift to facelift and also the estates with self leveling rear struts
Title: Re: Will parts fit?
Post by: dieseldean on 08 November 2008, 23:44:42
but if suspension is lowered then the camber will change
Title: Re: Will parts fit?
Post by: Albatross on 09 November 2008, 09:48:57
All the parts are the same with the exception of springs and shock absorbers.

Camber is not affected that much and is still within tolerance.

Checked with WIM and my very trusted stealer's EPM guide about two months ago when I changed my facelift Elite to brand new MV6 suspension and had it fitted by Tony at WIM.