Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: A1TNL on 08 November 2008, 18:21:21
-
Some pics of me removing my DIS pack from my omega v6 3.0
Maybe they can be used to as part of the guide for removal
(http://i454.photobucket.com/albums/qq268/A1TNL/omega/IMG_0028.jpg)(http://i454.photobucket.com/albums/qq268/A1TNL/omega/IMG_0029.jpg)(http://i454.photobucket.com/albums/qq268/A1TNL/omega/IMG_0030.jpg)(http://i454.photobucket.com/albums/qq268/A1TNL/omega/IMG_0034.jpg)
-
^^^^ Nothing showing am afraid :-?
Edit: Super job - showing now :y
-
could someone confirm the pics are showing ok now
Thanks
-
They are. :y
-
That dispack is well shot :o.
PS. Just for your info, it would be best in future to stick some rag or kitchen paper in the inlet manifolds in case you drop a bolt etc. down them :(.
-
Yikes! Thats one rotten Coil Pack,when I took mine out I had a problem telling it from the new one.
It is a bit easier if you clear all the bits away from the engine area though. I also removed all the wiper mechanism retaining screws to get that extra millimetre of clearance.
I must say that since I changed mine it is like having a new car,so smooth and punchy. I take the long way home just for fun now!
eddie
-
Yikes! Thats one rotten Coil Pack,when I took mine out I had a problem telling it from the new one. .......
Although mine wasn't quite as bad as that, mine had started to split due to corrosion of the coils.
-
That dispack is well shot :o.
PS. Just for your info, it would be best in future to stick some rag or kitchen paper in the inlet manifolds in case you drop a bolt etc. down them :(.
You are write with the kitchen paper, i did nearly lose a bolt
-
just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?
thanks (on about swapping mine thats all)
-
just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?
thanks (on about swapping mine thats all)
There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU
-
just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?
thanks (on about swapping mine thats all)
There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU
the 4 pin sockety thing you mentioned is what i was after ;)
-
just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?
thanks (on about swapping mine thats all)
There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU
the 4 pin sockety thing you mentioned is what i was after ;)
Be aware that there are 3 different DIS packs fitted, and it's the 4? pin plug that's different .... I think :-/ :y :y
I gave Vauxhall the Bosch number for my replacement, who price matched ..... errrrr .... someone else :y
-
Funny.... Just done mine today (pics on my help please post.) and mine was cracked although not that bad. Told its from failed hbv. Are u loosing coolant at all?? :y
-
lol... only :P
what is with vauxhall and changing things... sometimes for the worse...
two crank sensors later which is like twice as expensive, 2 headlight adjusters.. later ones break..3 dispacks...and then the fact theres prefacelift minifacelift and facelift models...
can they not just let a miggy be?
-
hey...just looks like mine did !!!!
-
Images moved to here http://www.omegaowners.com/forum/YaBB.pl?num=1155224533/0#1