Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Sir Tigger KC on 17 November 2008, 00:40:25
-
Hi All,
I fixed an oil leak from my filter housing a couple of weeks ago and got under to check it today as I've done a few miles since!! ;)
Anyhow the filter housing is fine, but there's oil coming from where the bell housing is bolted to the block, right at the bottom. Its not much and I tweaked the bolts but no difference... ::)
Any advice??
Cheers
Steve
-
Are you sure it isnt coming from higher up (cam cover) and running down to the rear of the engine/bellhousing area?