Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: RichB on 23 November 2008, 01:55:03
-
Hi guys I need to upgrade my lights and have decided to go to HID's. I have been offered a pair of projector HID's but they have no connectors with them etc. Will I just be able to swap straight over? Is the wiring loom the same between my standard reflectors and HID projectors?
Cheers,
Richard
-
not quite you need a plug to ballast pack and take the yellow wire from the main plug on original look ! the rest just plugs in no worries :y
-
Make sure the adjusters on the HIDs you buy work as they should, so many are broken ;)
-
To stay on right side of law, check http://www.omegaowners.com/forum/YaBB.pl?num=1199707220