Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: neimsn on 23 November 2008, 10:55:52

Title: aerial fitting
Post by: neimsn on 23 November 2008, 10:55:52

Does anyone know the easiest way to get under the head lining in the back, just forward of where the brake light is,  have a beesting aerial to fit but am not sure how to drop the lining.

any ides would be great.

Thanks

Title: Re: aerial fitting
Post by: Jimbob on 23 November 2008, 11:03:34

The plastic trim just pulls off, you can then get your hands in.

Title: Re: aerial fitting
Post by: neimsn on 23 November 2008, 11:06:44

Is that the trim moulded around the brake light that you are refering to

Title: Re: aerial fitting
Post by: Jimbob on 23 November 2008, 11:35:05

Havent a saloon to check on any more...

But the long piece that runs side to side, where the fabric meets the rear screen.

Title: Re: aerial fitting
Post by: neimsn on 23 November 2008, 12:26:33

ok mate thanks a lot I will have a look when the weather improves its freezing out there at the mo thanks for the tip. :y