Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gstylebaby on 26 November 2008, 05:24:39

Title: Xenon headlights
Post by: gstylebaby on 26 November 2008, 05:24:39

Hi guys and girls have got my hands on a set of xenon headlights but i think i need some extra wires as theres is a plug on the back of the ballast mines a 95 elite so it has the level sensor and the headlight wash...so on and so on.....So what do i have to do to fit these in my ride. Any help guys and gals would be as tony the tiger says grrrrrreat :y

Title: Re: Xenon headlights
Post by: Marks DTM Calib on 26 November 2008, 08:41:04

You need the connectors for the ballast packs, these then get spliced into the loom you already have feeding your headlights

Title: Re: Xenon headlights
Post by: markey mark on 26 November 2008, 10:45:15

nice one matey ! bout time lol ! you need the plugs for ballast packs and cut the yellow wire from headlight plug and join it to the ballast pack wire  and the brown goes to earth ! iirc you might have to up the fuses for the headlights to 20amp apart from that easy peasy !!

Title: Re: Xenon headlights
Post by: gstylebaby on 26 November 2008, 19:11:05

Quote

nice one matey ! bout time lol ! you need the plugs for ballast packs and cut the yellow wire from headlight plug and join it to the ballast pack wire  and the brown goes to earth ! iirc you might have to up the fuses for the headlights to 20amp apart from that easy peasy !!

I know mate it is about time looks like a trip to the scrappy's then.....Thanks for the help guys. :y :y